Меню

Blade and soul моды причесок

All about hair modding!

Cricket

Anivay’s guide on hair modding. Saved from Blade & Soul Dojo before it was shut down.

This guide will be primarily done by examples with brief explanations. I will list what files and numbers I am looking at and provide the exact cursor location of where I make changes. I highly encourage you to follow along from scratch in your own hex editor

If your attempt doesn’t work, you can download the completed mod that I included to compare it to yours. I will try to list my examples from easiest to most complex.

As we’re dealing with hex editing, when I’m specifically referring to a hex number rather than a decimal number I will use hex notation (0x) before the number. A programming calculator (like the one windows has) will be really helpful for converting between hex and decimal. Remember, hex numbers count 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.

Regular Hair, Hair 100+, and the Export Table — a brief summary
Hair mods only require the skeleton to work, so you can ignore the material completely

Hairs are generally defined by their object/core number formatting of: 3 characters for race, 1 character for gender, an underscore, followed by 3 digits for the identification number. (ex: JinF_001) All hair object core numbers are formatted like this in one of two ways in the skeleton UPK file: a standard complete string containing race and ID, or a split string with the race in the standard location and the number appended by a value found in the something called the Export Table. That later format of hairs is only used for hairs with IDs 100 or greater, so I refer to hairs that follow that pattern as a Hair100+ hair.

When dealing with Hair100+ and changing an accessory hat to a hair you will need to deal with the Export Table. The Export Table is what the game reads to find out what it needs to load from the file and where to find that information.

The main things that you need to know are:
— A double word is 4 pairs of hex numbers (ex: 00 00 00 00 is one double word; I’ll just call them words to keep it short)
— The word starting at 0x25 (read in little endian) will tell you the location of the start of the Export Table
— The first*** element of the Export Table points to the physics core number (e.g. string number of GonM_012_Physics)
— The last*** element of the Export Table points to the object core number (e.g. string number of GonM_012)
— The third word after the export index says what string number to look at for that property
— The fourth word after the export index controls what is appended onto the object

The fourth word is important to us because it is what makes 100+ hairs work. If you remember what I said about the format for 100+ hairs in the skeleton, they only have the race & gender in the upper part of the skeleton. What this fourth word in the export does is take the value in that place, subtract 1, and attach it to the race/gender with an underscore. For example, JinM is the object number that’s sitting by the physics number. If there is a 0x65 (101 in decimal) in the fourth word of the last element in the Export Table, it will ‘transform’ the JinM into JinM_100.

The third word is only important to us if the target core number does not have space to hold the new core number (for instance when you can’t fit JinF_027 in the place of JinF or 040022_LynF in the place of LynF_026). When we encounter this problem, we need to find a string to replace that is long enough to hold the new longer core number. Once you find the new place to put your core number, count (starting from 0) from the first string at the top of the document until you reach that point. That location number is what is stored in the third word.

To quickly find the first element of the export table (relating to physics core number) you can just Ctrl+F for the hex string FFFFFFFF (four pairs of Fs). The last element (relating object core number) will usually either be F8FFFFFF or F9FFFFFF if you want to Ctrl+F

***Do note however that these will not always be the correct positions for the object/physics cores. If something looks out of the ordinary (such as 0x00 in place of an actual value for a string location) you can dump the export table using umodel’s command dialog: umodel.exe -game=bns -list UPKNUMBER

Regular Hair to Regular Hair

Regular hair to regular hair is very standard and easy. If you’re within the same race/gender you only need to change the hair ID number in the object/physics cores.

Hair 100+ to 100+ is also pretty straightforward. Change the physics core as your normally would. To change the object core number you will need to go to the last element of the export table and change the 4th word of the element to your new hair number +1. Using your calculator in programmer mode will be very helpful for converting from decimal to hex. If your base core number is 100, punch in 101 into your calculator and it will tell you that the hex value hat you need is 0x65.

Читайте также:  Очень легкие прически для красивых девочек с длинными волосами

Example 2: LynF_100 (00033994) to LynF_107 (00034195)
Change Log:
Renamed 00034195.upk (copy) to 00033994.upk
[0x07AF] Changed Physics core from LynF_107_Physics to LynF_100_Physics
[0x1A16] In export table, changed 0x6C to 0x65

Cross-race hair works the same as usual except that you’re changing the race part of the cores as well. PLEASE NOTE that most cross-race hair swaps do not work due to different head sizes and positions between the races. From my experience the only swaps that work well most of the time are between Jin Female and Yun, but even then certain hairstyles have clipping problems. Most other race-exchanged hairs result in major clipping issues. As of now, it is unknown how to work around that problem.

When going from a hair100+ core number to a regular hair we run into the problem of the object core not being long enough to hold the new number. Lucky for us, the skeleton number is a string in the skeleton that basically serves no purpose and has no negative effect if removed or written over; not only that, but the length of the skeleton number is EXACTLY the length we need to hold a hair object core number! So. we replace the skeleton number with the new core number, change the physics core normally, in the export table change the old location of the object core number to the new location, and remove the appended value.

Example 4: GonF_001 (00002680) to GonF_110 (00037191)
Change Log:
Renamed 00037191.upk (copy) to 00002680.upk
[0x00BA] Changed 00037191 to GonF_001
[0x0625] Changed Physics core GonF_110_Physics to GonF_001_Physics
[0x1CBF] In export table, object index: change 0x39 to 0x03 (location of new object core, count strings from top starting at 0)
[0x1CC3] In export table, object index append: change 0x6F to 0x00

Changing a hair100+ into a regular hair is a little simpler than the other way around. You only need to remove the extra parts after the race/gender in the object core, change the physics core as normal, and then in the last element of the Export Table add the value to append (your hair number + 1)

So for whatever reason there are a couple regular hairs that are a little. weird and require a slightly different method. I will explain both; if the first method doesn’t work for your hair try the second.

The first method is basically identical to regular hair to regular hair — you just have a lot of leftover gunk you need to get rid of will nulls when you write over the old core with your base core.

Hopefully the first method worked for you, if not you have a bit more work to do. The second method requires a bit of length editing, deleting, and inserting. For whatever reason some random hairs have a secondary core number that must be used instead of the standard core number. That second core number is formatted Hair_JinF_### rather than just JinF_### and thus requires some extra length in order to fit. We will be taking that length from the ‘useless’ skeleton number.

Hair100+ to hat works very similar to Hair100+ to regular hair. The core numbers will have a lot of extra bits you want to get rid of with null.

The problem when your target is a hair and your base item is a hat is that the core number in the target skeleton does not have room to fit the base core number; ######_JinF is a lot longer than JinF_###. What we need to do is find some sacrifice string that is a) long enough to hold the long physics core number and b) does not have any negative effects when replaced. Luckily the string «bEnableBoneSpringAngular» is one of those strings that will work for us, so we’ll use that. If your file does not have that string, you will need to find another one that is at least 19 characters long and will not cause problems in game once replaced. We can use the old physics core to hold the new long object core. Since we are changing the positions of these two elements, we will need to make changes to the export table so the game can find the correct information.

There is a second way to do this that follows example 6.5 (regular hair to hat when normal method doesn’t work). This involves adjusting lengths and deleting/inserting bytes. If you feel like doing it this way go ahead, but I will not be doing another example for it in this tutorial. With this method you won’t need to touch the export table at all. Just subtract 6 bytes from the skeleton number and add 3 to the object and physics core numbers

You can think of this as a combination of «Hat to Regular Hair» and «Regular Hair to Hair100+». The problem when your target is a hair and your base item is a hat is that the core number in the target skeleton does not have room to fit the base core number; ######_JinF is a lot longer than JinF. What we need to do is find some sacrifice string that is a) long enough to hold the long physics core number and b) does not have any negative effects when replaced. Luckily the string «bEnableBoneSpringAngular» is one of those strings that will work for us, so we’ll use that. If your file does not have that string, you will need to find another one that is at least 19 characters long and will not cause problems in game once replaced. We can use the old physics core to hold the new long object core. Since we are changing the positions of these two elements, we will need to make changes to the export table so the game can find the correct information. The only extra step from Hat to Regular hair is that you need to remove the appended object core value.

Читайте также:  Модные стрижки для вьющихся волос не требующие укладки

Example 9: 040022_LynF (00012240) to LynF_110 (00037189)
Change Log:
Renamed 00037189.upk (copy) to 00012240.upk
[0x0142] Changed bEnableBoneSpringAngular to 040022_LynF_Physics (overwrite leftover characters with null)
[0x079C] Changed LynF_110_Physics to 040022_LynF (replace leftover characters with null)
[0x0D0E] In export table, Physics index: change 0x4A to 0x09 (count strings from top starting from 0) (NOTICE: 0xFFFFFFFF was not the correct element in the export table this time)
[0x1CFE] In export table, add 1 for the new object index: change 0x49 to 0x4A
[0x1D02] In export table, object index append: change 0x6E to 0x00

Источник

Please log in or register

To enjoy the benefits of Nexus Mods, please log in or register a new account

Hot mods

Uncap FPS and Enable HBAO-Plus

Guide, requires Nvidia Inspector. UNCAP FPS WORKS FOR AMD TOO

JinF Hair 005 to Yu Ran’s (Yura’s) hair

A simple swap of the 5th female Jin hair to Yu Ran’s or Yura’s hair

  • Models and Textures
  • By yevvie

Godfella preset for Blade and Soul

Adds SMAA, liftgamma, contrast, lumasharpen, Gaussian blur and negative vibrance.

  • ReShade Preset
  • By itsnothectic

NO MORE CLASS-RACE RESTRICTIONS in Blade and Soul

  • Models and Textures
  • By Bleeiz

Princess of Roses

Another mod for lyn by me

  • Models and Textures
  • By Asetnoheptus

Godfella lite (Only SweetFX)

This is Godfella without Gaussian Blur or embossing, it runs much better than the full version and looks otherwise identical.

  • ReShade Preset
  • By itsnothectic

Character Modeling And Modding Tutorial for Blade and Soul

  • Models and Textures
  • By Bleeiz

Join the largest
modding community

More mods

Another mod for lyn by me

Another mod for lyn by me

Dress-mod for lyn

Dress-mod for lyn

A simple swap of the female Gon Stalker outfit to a statue like plate armor, currently unused in game and unnamed to my knowledge. Check the screenshots to see how it looks.

A simple swap of the female Gon Stalker outfit to a statue like plate armor, currently unused in game and unnamed to my knowledge. Check the screenshots to see how it looks.

A simple swap of the 5th female Jin hair to Yu Ran’s or Yura’s hair

A simple swap of the 5th female Jin hair to Yu Ran’s or Yura’s hair

Guide, requires Nvidia Inspector. UNCAP FPS WORKS FOR AMD TOO

Guide, requires Nvidia Inspector. UNCAP FPS WORKS FOR AMD TOO

This is Godfella without Gaussian Blur or embossing, it runs much better than the full version and looks otherwise identical.

This is Godfella without Gaussian Blur or embossing, it runs much better than the full version and looks otherwise identical.

Adds SMAA, liftgamma, contrast, lumasharpen, Gaussian blur and negative vibrance.

Adds SMAA, liftgamma, contrast, lumasharpen, Gaussian blur and negative vibrance.

Media

News & Updates

It’s that time of year again! The Morrowind May Modathon 2021 starts today celebrating 19 years of modding for The Elder Scrolls III. Upload a mod for Morrowind during the month for your chance to win prizes and unlock some special achievements.

As usual, here are the full details from darkelfguy:

Celebrating Morrowind’s 19th anniversary, today I’m announcing the seventh annual Morrowind May Modathon Month Modding Competition, one of the biggest annual modding competit.

Today we are talking to randyknapp, the author of many UI and quality of life mods for both Valheim and Subnautica, as well as the popular, ARPG inspired Valheim mod: Epic Loot.


BigBizkit: Thank you for joining us today. First of all could you tell us a little bit about yourself?

randyknapp: Thanks for having me! I’m Randy, I’m 33, I live in Seattle with my wife and kids. I’m a professional video game developer with 10 years of industry experience.

If Morrowind modding sounds like your jam, we have something special for you brought to you by organizer Danae123 — please take it away!

The third edition of the Morrowind modding competition «MODJAM» is upon us and it’s back with a revenge

Come April 3rd (yes, this weekend!!), modders have 48 hours to make a mod based on a theme announced minutes before the jam begins. Simple enough, right?

Читайте также:  Модные прически 2021 года для девушки

Modders can work alone or in te.

Update on 2021-04-12 — Applications are now closed. Thank you to everyone who has applied. We are currently going through all applications and hope to have our new community manager soon!

With Nexus Mods getting bigger and better every year, we’re looking to bolster our ranks once again by recruiting a Junior Community Manager to work with our existing team to help us better serve our community.

This position is based in our offices in Exeter in the UK an.

Your notifications are getting a facelift! Starting on 22nd March 2021 all users will be upgraded to the shiny new system featuring easy access to their preferences, an improved design and more control directly in the notifications panel. We need to permanently remove all existing notifications with this change, so please use this time to check the ones you currently have if you care about them. There are a few things you need to know before the switch-over happens, so read on for more informati.

Two weeks ago we launched our Nexus Mods Trivia Quiz as a first of many community events for this year marking the 20 year anniversary of Nexus Mods. We all hope you enjoyed the quiz and if you weren’t one of the lucky winners — don’t worry. We’re planning to do plenty of events like these spread throughout the year, building up to our site’s birthday in August.

And with that said, keep on reading to see all the correct answers and to learn who the lucky winners are.

Vortex 1.4 is here — fresh out the oven! A lot has happened since our last Vortex related news update in September. Our devs have been working through many of your feature suggestions and implemented some very handy new improvements that will make your modding lives a bit easier. Keep on reading if you’d like to know more about what’s new in 1.4.

Vortex 1.4. has been released on the beta branch on 10th February 2021. Go to your «Settings > Vortex > Update» and select «Beta» to .

We all love games, that’s one of the things everyone in this community has in common, so when our friends over at GOG.com asked us if we’d like to give away some game keys to you guys as part of their «We Love Games» celebration, we could hardly say no!

We have 5 copies of Lichtspeer, Sword of the Necromancer, Bonkies, Gods Will Fall and Project Wingman to give out to the 25 randomly chosen winners.

There are a few rules you should be aware of b.

I think I speak for pretty much everyone when I say we’ve got high hopes this year will be much better for everyone around the globe than 2020 was. With that said, it might come as a bit of a surprise to some of you, but did you know that we’re actually going to celebrate the 20 year anniversary of Nexus Mods come August 2021? That’s right, Nexus Mods (and its predecessors going by other names) has now been around for almost two decades! Just to give you an idea of what that means: back then whe.

We have recently enabled a new download location for Premium Members that can potentially increase download speeds for any users who might have slower speeds than expected with their Premium Membership. If you’re a Premium Member and you think you should be getting faster speeds then please try the «CDN» download location, which now defaults to this new provider.

The long version

If you’ve had the (mis)fortune of taking the time to read my year i.

In this feature, we’re chatting with Aragas (aka Aragasas), one of our top Bannerlord mod authors. While you might not have heard of him, if you’ve played Mount & Blade II with mods there’s a good chance you’ve used at least one of the mods he and the other members of the Bannerlord Unofficial Tools & Resources (BUTR) team have worked on.

Thank you for taking the time to talk with us Aragas. To start off, can you tell us a bit about yourself?

Happy new year everyone.

It has been a couple of years since I last updated you all on the more internal goings on at Nexus Mods so I’ve decided to drum up enough enthusiasm to write another of my long-winded, banal «blog posts» on the matter. I wasn’t able to get around to doing one last year and I am aware that some of you actually like to punish yourselves, but if you’re like me and just like to skim read, here’s the TL;DR:

Statistically we’re doing better than ever. E.

Today we are talking to CloudedTruth — author of the very popular Relationship Dialogue Overhaul for both Skyrim and Skyrim Special Edition as well as various amazing follower mods.

Thank you for joining us today, it’s truly appreciated. We like to start these interviews off with a bit of a personal introduction, so could you please tell us a bit about yourself?

I’m 28 years old from the United States and currently work in manufacturing dealing with parts and.

Источник

Adblock
detector